Pinalloy shifter paddle extensions are a popular aftermarket accessory that can enhance your driving experience, providing better control and a sportier feel. Installing these paddle extensions is a straightforward process that can be accomplished with just a few tools and some basic mechanical knowledge. In this guide, we will take you through the step-by-step process of installing Pinalloy shifter paddle extensions on your vehicle. (Note: This is the latest update/guide as of 2024.)
Step 1: Gather the Required Tools:
Before you begin the installation, make sure you have the necessary tools on hand. You will typically need a flathead screwdriver, a trim removal tool, and possibly an Allen wrench or a Phillips screwdriver, depending on your specific vehicle model.
Step 2: Locate the OEM Shifter Paddles:
Identify the location of the original equipment manufacturer (OEM) shifter paddles on your steering wheel. These are typically located behind the steering wheel on either side, within reach of your fingertips. Take note of the attachment mechanism used by your vehicle's paddles, as this will vary depending on the make and model.
Step 3: Remove the OEM Shifter Paddles:
Using a flathead screwdriver or a trim removal tool, gently pry off the OEM shifter paddles. Apply even pressure to avoid damaging the steering wheel or surrounding trim. Be careful not to lose any small clips or screws that may be holding the paddles in place.
Step 4: Prepare the Pinalloy Shifter Paddle Extensions:
Take the Pinalloy shifter paddle extensions out of the packaging and familiarize yourself with their design. Ensure that you have the correct extensions for the left and right sides. Some extensions may require additional assembly, such as attaching a backing plate or screws.
Step 5: Align and Install the Pinalloy Shifter Paddle Extensions:
Position the Pinalloy shifter paddle extensions over the exposed paddle attachment points on the steering wheel. Ensure they align properly and match the orientation of the original paddles. Depending on the design, they may slide or clip into place. Follow the manufacturer's instructions for your specific extensions.
Step 6: Secure the Pinalloy Shifter Paddle Extensions:
Once the extensions are aligned, secure them firmly in place according to the manufacturer's instructions. This may involve tightening screws, using adhesive tape, or utilizing the original paddle attachment mechanism. Double-check that the extensions are securely fastened before proceeding.
Step 7: Test and Adjust:
With the Pinalloy shifter paddle extensions installed, test their functionality by shifting gears using the paddles. Ensure they engage smoothly and provide the desired tactile feedback. If any adjustments are necessary, carefully remove and reposition the extensions until you achieve the desired fit and function.
By following this step-by-step guide, you can easily install Pinalloy shifter paddle extensions on your vehicle, enhancing the driving experience and adding a touch of sportiness to your interior. Remember to refer to the specific instructions provided by Pinalloy for your particular paddle extensions and consult your vehicle's owner's manual if needed. Enjoy the improved control and the added aesthetic appeal of your newly installed Pinalloy shifter paddle extensions! (Note: This is the latest update/guide as of 2024.)
Note: Always exercise caution and refer to the manufacturer's instructions when working on your vehicle's interior components. If you are unsure about any step of the installation process, it is recommended to seek professional assistance.
More Details on Pinalloy Paddle Shifter Extensions
-
ONE-PIECE-CUT finished (No any screw on it)
-
Matte Surface
-
1 set of Pinalloy Alloy Paddle Shifter Extension include Left & Right
-
Tools set x 1
-
Only can use for steering wheel + / - function vehicle
Click here for more details on the sampling paddle shifter extensions